AWG/PLC Chip Quick Alignment and Evaluation System

Overview

It is the measurement system of the wave guide.
All N channels are measured automatically.
The automatic stage unit of six axes to the input fiber array side.
The automatic stage unit of six axes to the output fiber array side.
The automatic stage of one axis to the center position and wave guide side.
The wave guide located in a line is automatic in order, and is measured.
Automatic all the systems that carry out alignment about the fiber array, measurement of the contact distance of the wave guide, and parallel of the contact surface.
Of course, algorithm of automatic alignment etc, freely, it can do, and change and the addition can be performed and can respond also to two or more samples by calling the saved program.

▶The measurement of the waveguide alignment device.The fast and stable alignment of the strip waveguide measurements.
▶Because of the rigidity adopted SUS-made stage, make for a stable alignment disturbances such as temperature and vibration.
▶Motion made by our control program "Cockpit" performed by aligning high."Cockpit" Because you can customize for your own use, the type of optical device, it is possible to construct an environment for optimum alignment conditions and quality of various optical devices.
Specification
 
Items Distance Resolution
Movement of the array emission/
Movement of the injection array		 X stage ±25mm 0.025μm
Y stage ±15mm 0.025μm
Z stage ±25mm 0.025μm
θx stage ±8° 0.00078°
θy stage ±8° 0.0006°
θz stage ±8° 0.0006°
Movement of evaluation unit X stage ±50mm 0.025μm
Application
▶Wave-guide and Fiber array alignment

▶AWG and Fiber array alignment

▶Lens fiber array and V-mirror alignment